7. ASSEMBLY
BAS-311H
66
2) Install the work clamp pulse motor P assembly (16) to the
work clamp motor plate (19) with the four bolts (20) so
that the motor connector is facing downward.
3) Align the index marks on the work clamp cam gear (2)
and the work clamp driving gear (17), and then install the
work clamp motor plate (19) with the two bolts (21) so that
the backlash is 0.01 – 0.05 mm.
1) Set so that the clearance between the work clamp pulse motor
P assembly (16) and the work clamp driving gear (17) is 6.2
mm when the screw stop on the work clamp pulse motor P
assembly (16) is facing downward and the index mark on the
work clamp driving gear (17) is on the right, and then tighten
the two set screws (18) against the screw stops one after the
other.
3335B
Index mark
16. Work clamp pulse motor P assembly
17. Work clamp driving gear
18. Set screws [2 pcs.]
19. Work clamp motor plate
20. Bolts [4 pcs.]
21. Bolts [2 pcs.]
3336B
Index mark
3334B
