3. FUNCTION SETTINGS
BAS-311H
15
No.
Setting
range
Settings Setting
details
Initial
value
Specification
limits
Changes the feed timing for the 1st stitch at the sewing start
(-80 Early
←→
80: Late)
261 -80-80
Units (degree), Increments of 1
0 None
Changes the feed timing for the 2nd stitch at the sewing start
(-80 Early
←→
80: Late)
262 -80-80
Units (degree), Increments of 1
0 None
Changes the feed timing for the 3rd stitch at the sewing start
(-80 Early
←→
80: Late)
263 -80-80
Units (degree), Increments of 1
0 None
Changes the feed timing for the 3rd stitch before the sewing end
(-80 Early
←→
80: Late)
264 -80-80
Units (degree), Increments of 1
0 None
Changes the feed timing for the 2nd stitch before the sewing end
(-80 Early
←→
80: Late)
265 -80-80
Units (degree), Increments of 1
0 None
Changes the feed timing for the 1st stitch before the sewing end
(-80 Early
←→
80: Late)
266 -80-80
Units (degree), Increments of 1
0 None
When the overall feed timing has been changed using memory switch No. 260,
this specifies the effective number of stitches.
0
No limit
267 0-99
1-99
When the specified number of stitches is exceeded, the feed timing
returns to the standard timing.
0 None
Changes the overall feed timing reference
0
[Feed start reference] Makes the timing uniform at the start of feed.
1
[Needle up reference] Changes the timing at the start of feed so that
the needle zigzagging is even.
2
[Feed end reference] Makes the timing uniform at the end of feed.
268 0-3
3
[Linked to speed] Feed timing is uniform even if the sewing speed
changes.
1 None
Changes the feed timing reference for the first three stitches at the sewing start
0
[Feed start reference] Makes the timing uniform at the start of feed.
1
[Needle up reference] Changes the timing at the start of feed so that
the needle zigzagging is even.
269 0-2
2
[Feed end reference] Makes the timing uniform at the end of feed.
1 None
Home position detection operation when the program is changed
0
Home position detection is not carried out.
Moves to sewing start position when start switch is depressed, and
then stops.
1
Home position detection is not carried out.
Moves via the center of the sewing area to the sewing start position
when start switch is depressed, and then stops.
2
Home position detection is carried out.
Moves to sewing start position after home position detection when
start switch is depressed, and then stops.
270 0-3
3
Home position detection is not carried out.
If the program has changed, moves to the next sewing start position
and then stops.
0 None
