4. X AND Y PARALLEL MOVEMENT OF SEWING PATTERNS
BAS-311H
36
6
X-scale
Parallel movement mode
2649B
Press the SELECT key so that the Y-SCALE indicator
flashes.
2401B
*
When the SELECT key is pressed, the X-SCALE
indicator and the Y-SCALE indicator will flash
alternately.
7
3206B
Each time the
▲
or
▼
key is pressed, the work clamp will
move by 0.05 mm.
･
In Y-scale parallel movement mode, the work clamp
will move forward when the
▲
key is pressed, and
backward when the
▼
key is pressed.
･
The movement units change in accordance with the
movement distance.
0 - 9.95 mm : Increments of 0.05 mm
10.0 - 100 mm : Increments of 0.1 mm
8
Confirm the movement amount
2414B
Press the ENTER key.
･
The amount of parallel movement in the vertical
direction will be confirmed, and the menu display will
change to illuminated.
9
Exit parallel movement mode
TEST indicator switches off
Press the TEST key.
･
The display will return to the normal display and the
sewing machine will change to home position standby.
*
If you would like to return to step 4, press the SELECT
key instead of the TEST key.
2404B
NOTE:
･
If you change the program number, the X-scale or the Y-scale, the movement amount which has been stored will be reset.
However, if memory switch No. 465 is set to “3”, the movement amount will remain stored and not be reset.
･
When the power switch is turned off, the movement amount which has been stored will be reset. However, if memory
switch No. 465 is set to “2” or “3”, the movement amount will remain stored and will not be reset.
･
If memory switch No. 465 is set to “3”, the movement amount can be set for each program using parameters.
The “Movement amount setting” parameter selection comes in between “Sewing speed” and “Counter”.
Y-scale
Parallel movement mode
For example, set to
- 0.05.
