manualshive.com logo in svg

Brocade Communications Systems FastIron SX 1600, Руководство по установке оборудования

"Brocade Communications Systems FastIron SX 1600" - мощный коммутатор для сетей, предлагающий высокую производительность и надежность. Улучшите свою сеть с помощью этого устройства. Скачайте бесплатно брошюру и технические характеристики на нашем сайте. manualshive.com - ваш источник полезных руководств и инструкций.

Поделиться
Скачать
background image

Brocade FastIron X Series Chassis Hardware Installation Guide

91

53-1001723-02

Managing the cooling system

4

•

Thermal Plane 2 (also called Rule 2/2) – This thermal plane includes all of the temperature 
sensors on all of the Interface modules. Each Interface module has one temperature sensor.

The 

FSX 800

 and 

FSX 1600

 have three thermal planes:

•

Thermal Plane 1 (also called Rule 1/3) – This thermal plane includes the temperature sensors 
on the management module or modules only. Each management module has two temperature 
sensors.

•

Thermal Plane 2 (also called Rule 2/3) – This thermal plane includes all of the temperature 
sensors on all of the Interface modules. Each Interface module has one temperature sensor.

•

Thermal Plane 3 (also called Rule 3/3) – This thermal plane includes all of the temperature 
sensors on the switch fabric modules. Each switch fabric module has one temperature sensor.

All thermal planes, along with temperature thresholds, help determine at which speed the fans 
should operate. For each thermal plane, you can define separate temperature thresholds for fan 
speeds. Each thermal plane can have different temperature thresholds.

For each thermal plane, the Brocade device records the highest temperature based on the 
temperature reading of all of the modules in the thermal plane. The system uses this information 
and the current configured temperature thresholds to adjust the fan speed. You can view the 
temperature of each thermal plane using the show chassis command.

Fan speed modes

The fans can operate in automatic or manual mode. The default is automatic mode. This section 
describes both methods.

Automatic mode
By default, the fans operate in automatic mode, self-adjusting their speed based on both of the 
following factors:

•

the current temperature of each thermal plane

•

the current configured temperature threshold ranges for all fan speeds

The Brocade device has default temperature threshold ranges for fan speeds (

Table 21

). If desired, 

you can change these settings.

The software regularly polls the chassis to obtain the temperature of each thermal plane, then 
uses this information to decide whether or not to switch the fan speed. By default, the Brocade 
device polls the chassis every 60 seconds for temperature data. You can change this interval using 
the CLI command chassis poll-time.

If the temperature of a thermal plane exceeds the high temperature level of the temperature range 
associated with the current fan speed in the associated plane, the system will switch the fan speed 
to the next higher level. For example, let’s say the current fan speed is 3 (medium), and the 
configured operating temperature range for fan speed 3 is 40 to 50 degrees Centigrade for 
Thermal Plane 2. Based on this configuration, if the temperature of Thermal Plane 2 rises to 51 
degrees Centigrade, the system will automatically increase the fan speed to fan speed 4.

Manual mode
Typically, the fans operate in automatic mode, as described above. If desired, you can manually set 
the speed at which the fans will operate. For more information, refer to 

“Manually setting the fan 

speed”

 on page 95.

Содержание FastIron SX 1600

























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FastIron SX 1600

Supermicro Supero SC842i-500B User Manual preview
Supero SC842i-500B
Бренд: Supermicro Страницы: 60
Samsung KCT52A Training Manual preview
KCT52A
Бренд: Samsung Страницы: 93
Enterasys 5C105 MATRIX E5 Overview And Setup Manual preview
5C105 MATRIX E5
Бренд: Enterasys Страницы: 40
National Instruments cRIO-9081 User Manual preview
cRIO-9081
Бренд: National Instruments Страницы: 40
Razer Tomahawk Mini-ITX Getting Started preview
Tomahawk Mini-ITX
Бренд: Razer Страницы: 9
HP MSA 2040 User Manual preview
MSA 2040
Бренд: HP Страницы: 100
HP BladeSystem c3000 Setup And Installation Manual preview
BladeSystem c3000
Бренд: HP Страницы: 94
HP ProLiant s6500 Setup And Installation Manual preview
ProLiant s6500
Бренд: HP Страницы: 52
HP Xw460c - ProLiant - Blade Workstation User Manual preview
Xw460c - ProLiant - Blade Workstation
Бренд: HP Страницы: 235
HP BladeSystem c7000 Specifications preview
BladeSystem c7000
Бренд: HP Страницы: 24
HP Xw460c - ProLiant - Blade Workstation Installation Manual preview
Xw460c - ProLiant - Blade Workstation
Бренд: HP Страницы: 33
HP BladeSystem c3000 Troubleshooting Manual preview
BladeSystem c3000
Бренд: HP Страницы: 108
HP Moonshot 1500 Setup And Installation Manual preview
Moonshot 1500
Бренд: HP Страницы: 64
HP ProLiant s6500 Specification preview
ProLiant s6500
Бренд: HP Страницы: 18
HP BladeSystem c7000 Quickspecs preview
BladeSystem c7000
Бренд: HP Страницы: 43
HP BladeSystem c7000 Setup And Installation Manual preview
BladeSystem c7000
Бренд: HP Страницы: 103
HP Moonshot 1500 Maintenance And Service Manual preview
Moonshot 1500
Бренд: HP Страницы: 80
Tabor Electronics PXE6410 User Manual preview
PXE6410
Бренд: Tabor Electronics Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды