G730-Install-IG100 Installation Guide
Brocade
®
G730 Switch Hardware Installation Guide
Attaching the Rear Brackets to the Front Rack Posts
Perform the following steps to attach the rear brackets to the front rack posts:
1. Attach the right rear bracket to the right front rack post using two 10-32 x 5/8-in. screws and two retainer nuts. Use the
upper and lower holes in the bracket.
2. Attach the left rear bracket to the left front rack post using two 10-32 x 5/8-in. screws and two retainer nuts. Use the
upper and lower holes in the bracket.
3. Tighten all 10-32 x 5/8-in. screws to a torque of 29 cm-kg (25 in.-lb).
Figure 16: Attaching the Rear Brackets to the Front Rack Posts
1. Screws, 10-32 x 5/8-in. Panhead Phillips
2. Retainer Nuts, 10-32
Installing the Universal Two-Post Rack Kit (XBR-R000294)
Use the following instructions to install a Brocade 1U or 2U device in a two-post telecommunications (Telco) rack using the
Universal Two-Post Rack Kit (XBR-R000294).
G730-Install-IG100
33
Содержание Brocade G730
Страница 94: ......