BRIGHT OTF6000 Скачать руководство пользователя страница 70

Страница: 70 / 72

HEALTH AND SAFETY AT WORK ACT

DECONTAMINATION

CERTIFICATE

Customer input

Any product which is to be returned to Bright

Instrument Company Limited or serviced on site,

must be cleaned and decontaminated in the

appropriate manner. This certifi cate, duly completed,

must be either sent in advance (fi xed to the outer

packing containing the product), or handed to the

service engineer.

Packages will not be opened nor servicing

commenced until the Company or service engineer

have received a satisfactory certifi cate. Should

returned goods be considered a hazard by the

Company, they will be returned immediately to

the customer at his/her expense.

NB:

Microtome knives must be in boxes.

Name:

Address:

Position:

Department:

The equipment has been prepared to ensure safe handling/transportation.

Postcode:

Company:

Serial No.

Product No.

Telephone:

Email:

Order No.

Blood, body fl uids, pathological samples?

Other biohazards?

Other hazards?

Chemicals/substances hazardous to health?

Mark Box

A if applicable.

Otherwise complete

all parts of

B, providing

further information as

requested or appropriate.

Further Details:

Yes/No:

A. This equipment has not been in contact with unfi xed biological samples.

B. This equipment has been exposed internally or externally

to hazardous materials as indicated below:

This equipment has been cleaned and decontaminated:

If Yes, what method?

If No*, why not?

Yes/No:

* Such equipment must not be returned without the written

agreement of Bright Instrument Company Limited.

Signed:

Name:

Date:

Description:

Instruments

Office:

Bright Instruments LTD
Burnett House, Lakeview Court
Ermnie Business Park, Huntingdon
Cambridgeshire, PE29 6UA

Telephone: +44 (0) 808 168 9697
Email: [email protected]

Web: brightinstruments.com
Member:

Содержание OTF6000









































































Результаты поиска

Содержание OTF6000

Отзывы:

Похожие инструкции для OTF6000

Бренды по названию

Популярные бренды

BRIGHT OTF6000, Руководство пользователя

Результаты поиска

Содержание OTF6000

Отзывы:

Похожие инструкции для OTF6000

Бренды по названию

Популярные бренды