manualshive.com logo in svg

BRIGHT OTF6000, Руководство пользователя

Поделиться
Скачать
BRIGHT OTF6000 Скачать руководство пользователя страница 9

Bright Instruments

9

Warranty

1. The Seller ‘s products are carefully

inspected and submitted to its standard tests.

2. The Seller warrants all its products to be

free from defects in workmanship and 
materials under normal conditions of use and 
service provided always:

a. That if any of the goods so manufactured

is alleged to be defective in workmanship and 
material and is returned carriage paid, and 
protected against damage in transit to the 
Seller’s works at Luton within 12 months from 
the date of despatch and if after examination 
by the Seller that goods or part of them are 
found to be so defective then the Seller will 
repair or replace them free of charge and will 
return them to the Buyer, carriage paid.

b. Where any part of the goods manufactured

by the Seller is repaired or replaced under 
the terms of the foregoing warranty, such 
warranty shall thereafter be limited to a 
period of six months from the date when 
the goods shall have been re-delivered 
to the Buyer.

c. This warranty does not apply to any defects

caused by wear and tear, incorrect installation 
abnormal conditions of working, accident, 
misuse or neglect.

d. That save as in this clause herein before

expressed, the Seller shall not be under any 
liability for negligence or otherwise in respect 
of defects in goods delivered or for any injury, 
damage or loss resulting from such defects 
and the Seller’s liability under this clause shall 
be in lieu of any warranty or condition implied 
by law as to the quality or fitness for any 
particular purpose of such goods.

e. This warranty is expressly in lieu of all

other warranties, guarantees or liabilities 
expressed or implied by any of the Seller’s 
Representatives or Agents.

Please see our separate Product Warranty 
sheet for deliveries to the mainland UK.

WARNING:

 Before proceeding to Operating 

Instructions, ensure you are familiar with 
the contents of the pages marked ‘Safety 
Information’. This instrument must only be 
used by competent persons.

Содержание OTF6000









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды