Bridgeworks WANrockIT 200, Руководство пользователя

Страница: 33 / 83

Note: The order in which failover paths are used is set automatically and
cannot be manually changed.
To change the primary path, click on the Path Type drop box of the primary path and select Failover
from the drop down list. Click on the Path Type drop box of the path that you wish to set as the new
primary path and select Primary from the drop down list. Click on Apply to save your changes.
Note: Multiple links can be assigned as primary paths; The WANrockIT 200
will automatically attempt to use all available primary links simultaneously.
A green, red or grey arrow in the Path State box will indicate the state of each path:
• A green arrow pointing upwards means that it is a known link that is up.
• A red arrow pointing downwards means that it is a known link that is down.
• A grey arrow pointing downwards means that it is an unknown link that is down (only shown if
the Show Unavailable Paths checkbox is checked).
If a path has never been established, the link will be set as inactive and will not be shown by
default. To view all possible connections that may exist between the two Nodes, select the
Show
Unavailable Paths checkbox at the bottom of the window. This will now show any possible, but
never established links between the WAN ports of the two Nodes.
Configuring a Node’s Bandwidth
If there is other traffic on your network that needs to access a share of your bandwidth, you can
limit the bandwidth between your Nodes. The limit is induced on a per path basis.
To set a limit on a connection, select the Bandwidth Limit checkbox next to the connection that you
wish to limit. This will now allow the text box next to the checkbox to become editable. Type in a
value in megabytes per second and click the
Apply button.
Note: The minimum bandwidth limit you can set is 1 MB/s.
To remove a Bandwidth Limit , click on your chosen Node and click the Configure Node button.
Untick the Bandwidth Limit checkbox on the connection that you wish to remove the limit on, and
click Apply . The limit will now be lifted.
Note: Any changes to the bandwidth limit will become instantly effective on
pressing Apply.
33