Bridgeworks WANrockIT 200, Руководство пользователя

Страница: 26 / 83

WANrockIT Configuration
[ In this guide you will learn how to connect your On-Premise ESXi Node to your Off-Premise Node.
If you are connecting the Nodes with NAT, you will need to setup port forwarding for port 16665 for
the WAN ports of both Nodes, and use their public IP addresses to establish a connection.
If you are going to connect your Nodes without NAT using a private IP address (where your WAN link
is via a VPN or direct connect) you can use the local IP address of your Nodes. ] The
WANrockIT
section of the web interface allows the administrator to configure different aspects of the WANrockIT
200.
Node Management
This configuration page allows the adding and removing of Nodes, the instigation of a learning cycle
and the ability to take remote control of other Nodes.
From the Home screen, select the Node Management icon under the WANrockIT section.
The web interface will now display the following:
26