Bridgeworks WANrockIT 200, Руководство пользователя

Страница: 29 / 83

Protocol/Port Name Description
TCP 16665 axon-tunnel Reliable multipath data transport for high latencies
UDP 4500 ipsec-nat-t IPsec NAT-Traversal
UDP 500 isakmp Internet Security Association and Key Management Protocol
ESP IP Encapsulating Security Payload
To add a Node, click on the Add Node button on the Node Management page. Type the IP address
of the Node to be connected to in to the IP Address field, in the window shown below, and then
click the Add button.
Important: Only IPv4 addresses are supported in the Add Remote Node
dialogue box.
The Node will then search for the remote Node on the Network Interface, which will be displayed
with a progress bar.
Once completed, a dialogue window will appear with the Nodes name and the number of target
devices attached to that Node. Any remote Node connection that has been added to the local Node
in this way will be automatically saved, and will restore on reboot until the Node is removed. The
remote Node should then be displayed on the remote Node list as shown:
29