Bridgeworks WANrockIT 200, Руководство пользователя

Страница: 13 / 83

It is not necessary to specify which link speed you are using as the WANrockIT 200 will automatically
negotiate the best speed when first powered up.
To connect to the Fibre Channel network, a Small Form-factor Pluggable (SFP) interface module
must be inserted into the SFP receptacle at the back of the WANrockIT 200 as shown in the following
image.
Note: Only use SFP transceivers that meet or exceed the following standards:
EU: IEC/EN 60825-1, North America: FCC, CDRH
The following Optical Fibre cables may be used:
• Multi-mode Optical Fibre 50/125 OM3 Patch Cable (LC), up to 300 meters.
• Multi-mode Optical Fibre 50/125 OM4 Patch Cable (LC), up to 550 meters.
When the multi-mode cables are inserted in to the SFP, a “click” should be heard.
Connecting the Power Supply
Important: Before connecting the power cord, ensure that the wall or rack
plug is removed or is switched off.
The WANrockIT 200 contains two power supplies in a redundant supply configuration. The system
evenly distributes power across both power supplies to maximise efficiency. In order to utilise this
feature, please ensure that both power supplies are connected.
Connect the power supply to the rear of the WANrockIT 200 as shown below and turn on the power
from the wall socket.
13