25
Installation
Phenolic Privacy Restroom Partitions, Floor-to-Ceiling — Series 700, — 69", 72" & 69"/72" Tall
Bradley •
HDWC-INSTR-045 Rev. A: ECO 20-14-002S
6/25/2021
Refer to the hinge diagram and identify the top, middle,
and bottom hinges . The hinge leaves are configured so
that the door cannot be lifted off of the pilaster .
C
Separate the hinge leaves . Align the holes in the leaves
that have the plastic bushings with teeth and the cam
alignment slots to the threaded inserts in the pilaster .
Secure using the 1/4-20 x 1/2" cap screws provided .
Hand tighten screws .
D
Align the holes in the leaf without teeth to the top and
middle threaded inserts in the door, and then secure
using the 1/4-20 x 1/2" cap screws provided . Hand
tighten screws .
F
8
Surface-Mounted Hinges (continued)
The knuckle gap of the top and middle hinge varies based
on the cam setting.
Left-hand outswing door shown.
The gap between the bottom of the door and the pilaster
leaf is needed for rise of the door when opened.
The tabs on the cam need to align with the slots in the
leaf with has the plastic bushing and teeth.
Insert the hinge pin and cam into the top and middle
pilaster leaf . The alignment tabs on the cam should fit
into the slots on the leaf .
E
Lift the door into place . Slide the top and middle door
leaf over the top and middle pilaster leaf hinge pin and
rest on the spacer (provided by others) .
G
Insert the hinge pin into the bottom hinge door leaf and
slide it up into the pilaster bottom hinge leaf . Align the
holes with the inserts in the door and secure using the
1/4-20 x 1/2" cap screws provided . Hand tighten screws .
Place 1/8" spacers (by others) between the door and
pilaster notch at the top and bottom to achieve a
symmetric gap between the door, pilaster on hinge, and
latch sides . Torque screws to 80–90 in-lb .
Adjust the door opening as follows:
• To increase the door opening, lift the door and rotate
cam toward the direction of the door, making sure the
bushing and cam tabs are aligned .
• To decrease the door opening, lift the door and rotate
cam toward the direction of the pilaster, making sure
the bushing and cam tabs are aligned .
H
I
J
Cam Tabs
Slots on Bushing
Pilaster - Top, Middle & Bottom Hinge Leaf
Door - Top and Middle Hinge Leaf
Door - Bottom Hinge Leaf
Spacer 6" (152) for 72" Tall Panels (72" Tall Option)
Spacer 9" (229) for 69" Tall Panels / ADA Stall (69" Tall Option)
