13
Installation
Bradmar
™
Restroom Partitions, Floor-Mounted with Overhead Brace — Series 400
Bradley
•
HDWP-INSTR-013 Rev. K; ECN 12-14-012
10/1/2014
Top and
Bottom Insert
Female (2)
Bottom Insert
Male w/ Cutoff
Cam & Spacer
(1)
Top Insert w/
Cam Male (1)
Aluminium
Hinge Blank
(4)
Left In and Right Out Assembly
Top Hinge Set
Bottom Hinge Set
Insert
Correct
Incorrect
Hinge
Blank
Aluminum Hinge Blank
Reference
Mark
Reference
Mark
Top and
Bottom Insert
Female
Bottom Insert
Male w/ Cutoff
Cam & Spacer
Top Insert w/
Cam Male
Top Hinge Set
Bottom Hinge Set
Cam
Cutoff
Cam
Right In and Left Out Assembly
8c Aluminum Wraparound Hinge (Optional)
Before installing the hinges, make sure the door openings are the appropriate size, all pilasters are
plumb, secured to the shoe and that the headrail is installed. Determine the door swing by facing the
compartment from the outside. Refer to your submittal drawings to determine each specific door swing
for your application.
Hinge blanks and inserts have reference marks
that are used in setting the hinge position. The
hinge contains the cam mechanism and the bottom
hinge has the cutoff cam with spacer.
Right-hand
inswing
(RHI)
Left-hand
inswing
(LHI)
Right-hand
outswing
(RHO)
Left-hand
outswing
(LHO)
Separate the hinge components and ensure all parts
are included as shown
A
Assemble inserts into the hinge blanks making sure the
insert collar fits tightly against each of the hinge blanks.
D
Align the reference marks of the inserts and hinge
blanks as shown.
C
Find the hinge assembly that coincides with the door
swing . Arrange the hinge sets as shown .
B
Pilaster Side
Pilaster Side
Pilaster Side
Pilaster Side
Door Side
Door Side
Door Side
Door Side
