Boston Whaler 420 OUTRAGE, Руководство пользователя

Страница: 143 / 268

3-49 420 Outrage
Chapter 3 • Systems Overview & Operation
420 Outrage
R
Operating The Windlass Manually
In the event that there is a loss of power to the
windlass the anchor can be raised and/or lowered
manually by using the emergency handle located in
the bow locker.
There are two star sockets on the top of the windlass
used for manual deployment of the anchor. Inserting
the emergency handle into the center socket and
turning it counter-clockwise will loosen the anchor
windlass chainwheel. The star socket located off-
center is used for retrieving and lowering the anchor.
Turning the handle counterclockwise will allow you
to lower the anchor, while turning it clockwise will
raise it.
When operation is complete, insert the handle into
the center star socket and tighten the windlass
chainwheel by rotating the handle clockwise. Be
sure to attach the safety lanyard when the anchor is
stowed in the bow pulpit.
• To lower
the anchor,
press and hold on
the “DOWN” button
on the remote.
REFER TO THE MANUFACTURER’S MANUAL IN
YOUR OWNER’S MANUAL PACKET FOR COMPLETE
INSTRUCTIONS AND WARRANTY.
UP
DO
WN
Windlass Manual/Emergency Operation
Fig. 3.49.1
EMERGENCY HANDLE
LOOSEN WINDLASS
RAISE/LOWER ANCHOR
1
2
3
1
2
3
• Plug the power
cable into the power
receptacle on the
aft of the bow
locker (Figure
3.44.1)
• Turn the forward
portion of the plug
clockwise to lock.
• To raise the anchor,
press and hold on
the “UP” button of
the remote.
UP
DO
WN