Boston Whaler 420 OUTRAGE, Руководство пользователя

Страница: 145 / 268

3-51 420 Outrage
Chapter 3 • Systems Overview & Operation
420 Outrage
R
• Be sure there is adequate rode.
• Secure rode to both the anchor and the
boat.
• Stop the boat completely before lowering
the anchor.
• Keep feet clear of lines.
• Turn on the anchor light when at anchor or
drifting (not under power) at night or in low
visibility.
NOTE: If using the windlass, refer to the windlass
operator’s manual for anchoring instructions
To weigh (or retrieve) the anchor, start the boat and
run slowly up to the anchor, taking up the rode as
you go. The anchor will usually break out when the
rode becomes vertical. Coil lines to let them dry
before stowing.
Weighing the Anchor
There is no best way to set an anchor. Experiment
to see how it performs. One method is to turn the
rode around a cleat and slowly pay out as the boat
backs from the anchor site. When the proper scope
has been reached snub the rode quickly, causing the
anchor to dig in to the sea bottom.
• Reverse the engine slowly to drive the anchor
in and to prevent it from dragging.
• Secure the rode to the cleat.
Setting the Anchor
Lowering The Anchor
Be careful that the trailing lines do not foul in
the propeller.
!
CAUTION
NOTICE
Before using the anchor be sure the anchor
line is secured to the eye in the bottom of the
anchor locker.