Boston Whaler 420 OUTRAGE, Руководство пользователя

Страница: 50 / 268

2-2
Chapter 2 • General Information
420 Outrage
R
Manufacturer’s Certification
All boats must comply with federal regulations regarding maximum capacities. The Specifications and
Dimensions table, listed later in this chapter, indicates the maximum weight, number of persons, and
maximum horsepower this vessel is rated to handle. Do not exceed these specifications. The information
on the certification plate does not relieve the operator
of responsibility. Use common sense and sound
judgement when placing equipment and/or passengers
in this vessel. Do not load to capacity in poor weather/
rough water. The number of seats does not indicate
passenger capacity in poor weather/rough water. At
speeds above idle, all passengers should be seated on
the seats provided.
Certification Plates
NOTE: The type of capacity plate will vary dependent on the local governing authority.
NMMA Plate
An NMMA Certification indicates that your boat has
been verified by the National Marine Manufacturers
Association (NMMA) to be in compliance with applicable
federal regulations and American Boat and Yacht Council
(ABYC) standards. Recreational vessels up to 20 feet
(6.1 meters) have passenger and cargo weight capacities
compliant with USCG regulations. Vessels 26 feet (7.9
meters) and under have passenger and cargo weight
capacities compliant with ABYC standards. Vessels over
26 feet have NMMA yacht certification.
Canadian Conformity Plate
A Canada Compliance Notice indicates that your boat has
been certified to comply with construction standards for
small vessels by Transport Canada (TC). Recreational
vessels up to 6 meters (19.7 feet) have passenger and cargo
weight capacities compliant with TC regulations. Vessels
over 6 meters are also compliant with TC regulations, but
do not state capacities on the plate.
Never carry more weight or passengers than
indicated on the certification plate, regardless of
weather or water conditions.
DANGER
!
Replacement Part No. 125062
YACHT CERTIFICATION
DESIGN COMPLIANCE WITH NMMA REQUIREMENTS IN EFFECT
ON THE DATE OF CERTIFICATION IS VERIFIED. MANUFACTURER
RESPONSIBLE FOR PRODUCTION CONTROL
NATIONAL MARINE MANUFACTURERS ASSOCIATION
THIS BOAT COMPLIES WITH U.S. COAST GUARD SAFETY
STANDARDS IN EFFECT ON THE DATE OF CERTIFICATION
BOSTON WHALER, EDGEWATER, FL.
MEETS U.S. EPA EVAP STANDARDS USING CERTlFIED COMPONENTS
2152856
CANADIAN COMPLIANCE NOTICE
AVIS DE CONFORMITÉ
CANADIEN
BOSTON WHALER (BWC)
EDGEWATER, FL, USA
MODEL / MODÈLE:
DESIGN CATEGORY
THE MANUFACTURER DECLARES THAT THIS PRODUCT COMPLIES WITH THE
PLEASURE CRAFT CONSTRUCTION REQUIREMENTS OF THE
SMALL VESSEL
REGULATIONS AS THEY READ ON THE DAY ON WHICH THE CONSTRUCTION OF
THE VESSEL WAS STARTED OR ON THE DAY ON WHICH THE VESSEL WAS
IMPORTED.
LE FABRICANT ATTESTE QUE CE BÂTIMENT EST CONFORME AUX EXIGENCES
DE CONSTRUCTION DES EMBARCATIONS DE PLAISANCE DU
RÈGLEMENT SUR
LES PETITS BÂTIMENTS, EN VIGUEUR À LA DATE DU DÉBUT DE SA
CONSTRUCTION OU À LA DATE DE SON IMPORTATION.
B
420 OUTRAGE