Boston Whaler 420 OUTRAGE, Руководство пользователя

Страница: 113 / 268

3-19 420 Outrage
Chapter 3 • Systems Overview & Operation
420 Outrage
R
Livewell Operation
• Make sure that the hull seacock is in the open
position (see Figure 3.19.1).
• Place plug in bottom drain.
• Open the livewell flow control valve.
• Fill the livewell(s) by depressing either the
“LIVEWELL AFT” or “LIVEWELL
P R E P S TA . ” s w i t c h o n t h e b a i t
prep station switch panel. The raw
water pump will be activated and the system
will become functional.
Raw Water Washdown
The raw water washdown hose is located on the
port side wall of the helm seating platform. The
washdown unit is pressurized by the raw water
pump which is activated by depressing the “WATER
ATTENTION
The seacock MUST be in the OPEN position
when livewell is in use. Running the pump dry
may damage the unit.
- The prep station livewell flow
control valve is located behind the
access door on the forward base of
the prep station.
- The port aft livewell flow
control valve is located behind the
access door in the port aft cockpit.
The livewells have three drains to regulate the
amount of water in the unit. The bottom drain is
used to empty the livewell of water completely.
By utilizing the drain plug (supplied) between the
two overflow drains in the side of the livewell you
can adjust the level of water in the unit. This “Full-
Fill” design provides a stable environment to reduce
fatigue on your baitfish resulting in a more active
and longer lasting product.
A drain tube with strainer connects to the livewell
overflow drains and will direct overflow/excess
water to the port thru-hull drain.
Raw Water Washdown Hose
Fig. 3.19.2
1
2
RAW WATER HOSE
PORT COMPANION HELM SEAT
1
2
Prep Station Livewell
Fig. 3.19.1
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
BAIT PREP STATION
FROM RAW WATER PUMP
THRU HULL VENT
BOTTOM DRAIN
MID LEVEL DRAIN
LIVEWELL FILL
SEACOCK
LIVEWELL VIEWING WINDOW
8
1