- 49 -
4.4.7 Signals → OLED-display
„language“
Select the language on the OLED display, German or English
Default: English
„display of results“
Selection of the result display on the OLED display.
Smiley
shows the
result as a smiley with the process values shown small,
Force
shows the
achieved force value large,
Travel
shows the achieved travel value large,
Large smiley
shows the result as a smiley without process values.
Default: Large smiley
„units“
Selection of units on the OLED display, SI units or imperial units
Default: SI units (kN and mm)
„enable display“
Selection of the display on the OLED display upon release.
Target value
shows the tool's target value, e.g. 10 kN.
Barcode
shows the scanned barcode, max. 9 characters.
Default: Set value
„empty container“
Suppress message in favour
of the result display
The message that the container must be emptied is suppressed for the
time being so that the result display is not affected. The message is not
output until the next release.
„rotate display 180°“
Selecting the check-box turns the display on the OLED display by 180°.
Содержание RTB-20
