Bossard RTB-20, Руководство по эксплуатации

Страница: 24 / 76

- 24 -
4.2.4 LED indicator at the back and sound signals
Circumferential indicator lights up green after setting, no sound signal
• The parametrised setting was completed successfully.
• The battery capacity is sufficient, the tool is ready for the next setting.
Circumferential indicator lights red after setting, no sound signal
• A programmed parameter was not reached.
1 9 3 2 0 0 1 9
S e r v i c e B
*
* LED Light indicator
NOTE
The tool will only start after a battery change if the battery has sufficient capacity.
4.2.5 OLED display
• After a sufficiently charged battery has been pushed on the tool will start.
• After pressing the start button, the tool is initialised. The back, circumferential indicator
briefly lights up with multiple colours. A beep sounds and on the back of the tool the
display indicates the current status.
• The tool is now ready for use.
• After several seconds without actuation the display will dim. After longer downtime the
tool will switch into standby mode.
1. Button for menu activation and selection
2. Button for decreasing value (-)
3. Button for increasing value (+)
4. State of charge display
2
1
3
P01 000/001
ready
HandMode
4