Bossard RTB-20, Руководство по эксплуатации

Страница: 37 / 76

- 37 -
Display notifications Meaning
P03 001/003
OK
kN
7.15
mm
9.45
The first of three riveting operations was successful. Achieved force
7.15 kN and a stroke of 9.45 mm. This message is also available as a
NOK notice.
SmartTool-Manager display setting:
Display - OLED display - Display of results: Smiley
P01 001/003
OK 2
kN
7.15
mm
9.45
7.15
The first of three riveting operations was successful. Achieved force
7.15 kN and a stroke of 9.45 mm. This message is also available as a
NOK notice.
SmartTool-Manager display setting:
Display - OLED display - Display of results: Force
P01 001/003
OK
kN
7.15
mm
9.45
OK 02
The first of three riveting operations was successful. In the visualis -
ation area, the counter decreases as the remaining number of rivets is
displayed. This message is also available as a NOK notice.
SmartTool-Manager display setting:
Display - OLED display - Display of results: Rivet counter
P01 001/003
OK 2
kN
7.15
mm
9.45
9.45
The first of three rivet nuts was successful. Achieved force 7.15 kN and
a stroke of 9.45 mm. This message is also available as a NOK notice.
SmartTool-Manager display setting:
Display - OLED display - Display of results: Travel
P03 002/002
All OK
All three riveting operations were successful.
SmartTool-Manager display setting:
Display - OLED display - Display of results: Large smiley
P01 001/003
NOK
kN
7.39
NOK 03
mm
0.75
Example of the NOK setting process:
Process 1 NOK, 2 processes left. If NOK acknowledgement is activat -
ed, the display must be acknowledged by pressing the yellow display
button.
19320012
SERVICE B
Tool must be calibrated and is only released again after calibration.
19320012
SERVICE C
Tool must go for servicing and is only released again after confirmation
by the service team.
RSSI -0dBn
19.4
The battery voltage can be displayed in the Setup menu under "Info".