- 29 -
4.2.10 Set fastener
NOTE
Always place the riveting tool at a right angle (90°) to the work surface to be
riveted. An oblique placement leads to faulty riveting. Use only appropriate
nose pieces for the rivet. An incorrect nose piece can lead to damages in the
clamping jaws as well as the nose piece. You can find the size of the bore and
the clamping area in the rivet manufacturer’s information.
1. Place blind rivet in nose piece.
2. Guide the blind rivet into the hole provided.
3. Press the blind rivet against the component in order to activate the pressure trigger
(chapter 4.2.11 on page 30).
4. Start setting process by pressing the start button, hold start button down.
5. The tool will recognise the break (chapter 4.2.12 on page 31) and automatically returns
to the starting position.
6. Release start button.
7. Let the broken rivet slide into the riveting mandrel containers by tipping the riveting tool.
1
3
2
5
Содержание RTB-20
