Boss SMARTHITCH2 RT3 POWER-V, Руководство по установке

Страница: 24 / 32

V- Blade Controllers
24
SmartTouch 2
TM
Control
Operating Instructions
Figure 34. V-Blade Control Instructions G10365
ON/OFF: Push the ON/OFF switch to the left ON
position to turn the control on. Green LED indicators
will light up on the control. Push the ON/OFF switch to
the right OFF position to turn the control off.
RAISE: To raise the blade of the plow, quickly press
the center button upward twice. You can also press
and hold the center button upward until the blade is
fully raised.
LOWER: To lower the blade of the plow, quickly push
the center button downward twice. You can also press
and hold the center button downward until the blade is
fully lowered.
FLOAT: The plow will automatically activate the
FLOAT feature when the center button is quickly
pressed downward twice. (The center LED indicator
will turn RED). You can also press and hold the center
button downward for 2 seconds. (The center LED
indicator will turn RED). Press the raise button to turn
the FLOAT function off.
“What Is FLOAT?”: The FLOAT feature allows the
plow blade to follow the contour of the ground. Press
the raise button to turn FLOAT function off.
Note: The control MUST be in FLOAT to use
SmartHitch 2
TM
to attach or detach the snowplow.
ANGLE LEFT: To plow snow to the left, press and
hold the left wing out and left wing in buttons
simultaneously until the blades are fully angled.
ANGLE RIGHT: To plow snow to the right, press and
hold the right wing out and right wing in buttons
simultaneously until the blades are fully angled.
VEE: To create the Vee shape with the plow blades,
press both the left wing in and right wing in buttons
simultaneously until the blades are fully retracted.
SCOOP: To create the Scoop shape with the plow,
press both the left wing out and right wing out buttons
simultaneously until the blades are fully extended.
Note: The control should be turned off when not in
use. It can then be unplugged and stored.
SLEEP mode: If the controller is ON but not used for
20 minutes, the automatic SLEEP mode will be
activated. The controller LED lights will flash green
and red when the controller is in SLEEP mode. Turn
the controller OFF to deactivate SLEEP mode.