Bosch VEZ Series Скачать руководство пользователя страница 53

Страница: 53 / 132

AutoDome Easy II

Preparing the Wiring | en

Bosch Security Systems, Inc.

User Manual

F.01U.139.424 | 2.0 | 2009.08

8.5.3

Daisy Chaining

In a daisy chain configuration, where multiple domes are

connected, the resistor must be removed for all but the last

dome. The AutoDome Easy II can be daisy chained up to a

maximum of four (4) domes. To daisy chain the unit, do the

following prior to mounting the camera:

Remove the 100 ohm resistor by cutting both leads from

all but the last dome.

Locate the cable assembly on the first camera with a seven

(7) pin white mating connector on one end and the seven

(7) flying leads on the other end.

Connect the biphase (+) from the controller to the first

camera yellow lead and secure.

Connect the biphase (-) from the controller to the white/

green lead on the first camera and secure.

Connect the biphase (+) from the first camera yellow lead

to the second camera yellow lead and secure.

Connect the biphase (-) from the first camera white/green

lead to the second camera white/green lead and secure.

Repeat steps as required for up to four (4) cameras.

Содержание VEZ Series





































































































































Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды

Bosch VEZ Series, Руководство пользователя

Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды