Bosch VEZ Series Скачать руководство пользователя страница 16

Страница: 16 / 132

en | Safety

AutoDome Easy II

F.01U.139.424 | 2.0 | 2009.08

User Manual

Bosch Security Systems, Inc.

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the

performance or reliability of the security or signaling aspects of

this product. UL has only tested fire, shock and/or casualty

hazards as outlined in UL's

Standard(s) for Safety for Information

Technology Equipment, UL/IEC 60950-1

. UL Certification does

not cover the performance or reliability of the security or

signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR

CERTIFICATIONS WHATSOEVER REGARDING THE

PERFORMANCE OR RELIABILITY OF ANY SECURITY OR

SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.

Copyright

This user guide is the intellectual property of Bosch Security

Systems, Inc. and is protected by copyright.

Trademarks

All hardware and software product names used in this

document are likely to be registered trademarks and must be

treated accordingly.

NOTICE!

This user guide has been compiled with great care and

the information it contains has been thoroughly verified. The

text was complete and correct at the time of printing. The

ongoing development of the products may mean that the

content of the user guide can change without notice. Bosch

Security Systems accepts no liability for damage resulting

directly or indirectly from faults, incompleteness or

discrepancies between the user guide and the product

described.

Содержание VEZ Series





































































































































Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды

Bosch VEZ Series, Руководство пользователя

Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды