Bosch VEZ Series Скачать руководство пользователя страница 14

Страница: 14 / 132

en | Safety

AutoDome Easy II

F.01U.139.424 | 2.0 | 2009.08

User Manual

Bosch Security Systems, Inc.

FCC & ICES INFORMATION

(U.S.A. and Canadian Models Only)

This device complies with

part 15

of the

FCC Rules

. Operation is

subject to the following conditions:

–

this device may not cause harmful interference, and

–

this device must accept any interference received,

including interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules and ICES-003 of Industry Canada. These limits are

designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and radiates

radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct

the interference at his expense.

Intentional or unintentional modifications not expressly

approved by the party responsible for compliance shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult

the dealer or an experienced radio/television technician for

corrective action.

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office,

Washington, DC 20402, Stock No. 004-000-00345-4.

Содержание VEZ Series





































































































































Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды

Bosch VEZ Series, Руководство пользователя

Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды