Bosch VEZ Series, Руководство пользователя

Страница: 44 / 132

38 en | Installing a Pipe Mount AutoDome Easy II
F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
7.1.2 Preparing the Ceiling for Installation
1. Determine a secure hard surface location for the ceiling
pipe mount (supplied separately).
Figure 7.1 Pipe Mount Dimensions
2. Use the four (4) holes in the flange as a template to mark
the position where the holes should be drilled to secure
the mount.
Figure 7.2 Mark Flange Holes
3. Drill the four (4) holes in the installation location (screws
not supplied, use a minimum of 10 mm (.39 in.)).
4. Drill a fifth hole (maximum of 20 mm) in the center of the
four-hole pattern used to mount the flange. Use this hole
to feed the wires through the mount.
5. Fit the flange (supplied) to the pipe and the pipe to the
cap.
Note: Select the pipe length of 200 mm (7.9 in.), 300 mm
(11.8 in.), or combine the two (2) pipes with the integral
coupler for 505 mm (20 in.).
736.0
(28.98)
429.0
(16.89)
88.8
(3.5)
88.8
(3.5)
Ø11.2 (4x)
(0.44)
3/4-14 NP
SM Threads
Ø153.0
529.0
(20.83)