Bosch VEZ Series, Руководство пользователя

Страница: 91 / 132

AutoDome Easy II Common User Commands (unlocked) | en 85
Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08
12 Common User Commands (unlocked)
This chapter details the commonly used Bosch keyboard setup
commands. See Section 14 Keyboard Commands by Number,
page 97 , for a complete list of commands.
12.1 Setting AutoPan Mode
AutoPan mode pans the AutoDome Easy II camera 360º or pans
between user defined limits (when programmed). The
AutoDome Easy II camera continues to pan until stopped by
moving the joystick.
To pan 360º:
1. Press ON-1-ENTER .
2. Move the joystick to stop the pan.
To set left and right pan limits:
1. Move the camera to the starting position and press SET-
101-ENTER to set the left limit.
2. Move the camera to the end position and press SET-102-
ENTER to set the right limit.
To start AutoPan between limits:
1. Press ON-2-ENTER .
2. Move the joystick to stop the pan.
12.2 Setting Preset Shots
Preset shots are saved camera positions. Shots are saved as
scenes, therefore, the terms SHOT and SCENE are used
interchangeably.
To set a Shot:
1. Move the camera to the position you want to save.
2. Press SHOT-#-ENTER where # can be a number from 1 to
99 that identifies the camera position of the scene.
To view a Shot:

Press SHOT-#-ENTER where # is the number of the scene
position you want to view.