Bosch VEZ Series, Руководство пользователя

Страница: 43 / 132

AutoDome Easy II Installing a Pipe Mount | en 37
Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08
7 Installing a Pipe Mount
7.1 Description
This chapter details how to mount the AutoDome Easy II to a
pipe. The AutoDome Easy II is also suitable for surface
( Section 4 Installing a Surface Mount, page 17 ), wall
( Section 5 Installing a Wall Mount, page 23 ), and recess
mounting ( Section 6 Installing a Recessed Mount, page 29 ). For
specific directions on mounting the unit, see the manual that
came with your mount.
7.1.1 Tools/Supplies Required
– Appropriate straight slot screwdrivers
– No. 2 Phillips screwdriver
– Appropriate tool for cutting a hole in drywall or ceiling tile
(if applicable)
– Ground Lug (outdoor use only)
– T-10 Torx wrench
NOTICE! The image sensors in modern CCD cameras are highly
sensitive and require special care for proper performance and
extended lifetime. Follow the guidelines for optimum results
with your camera:
– Do not expose to direct sunlight or bright spotlights in
operating and nonoperating conditions.
– Avoid bright lights in the field of view of the camera. Bright
lights cause a "smearing" effect, which is visible as white
lines above and below the highlight. Prolonged exposure to
bright lights may cause bleaching of the sensor's color
filters. This will be visible as colored spots in the picture
and is irreversible.