Bosch VEZ Series Скачать руководство пользователя страница 10

Страница: 10 / 132

en | Safety

AutoDome Easy II

F.01U.139.424 | 2.0 | 2009.08

User Manual

Bosch Security Systems, Inc.

1.2

Safety Precautions

1.3

Important Notices

Accessories -

Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall, causing serious

injury to persons and/or severe damage to the unit. Use only

with the cart, stand, tripod, bracket, or table specified by the

manufacturer. When a cart is used, exercise caution and care

when moving the cart/apparatus combination to avoid tipping it

over, which could result in injury. Quick stops, excessive force,

or uneven surfaces may cause the cart/unit combination to

overturn. Mount the unit in line with the manufacturer's

instructions.

All-pole power switch -

Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building. If it is needed to open the

housing for servicing and/or other activities, use this all-pole

DANGER!

This symbol indicates an imminently hazardous situation such

as “Dangerous Voltage” inside the product. If not avoided, this

will result in an electrical shock, serious bodily injury, or death.

WARNING!

Indicates a potentially hazardous situation. If not avoided, this

may result in minor or moderate injury. Alerts the user to

important instructions accompanying the unit.

CAUTION!

Indicates a potentially hazardous situation. If not avoided, this

may result in damage to property or risk of damage to the unit.

NOTICE!

This symbol indicates information or a company policy

that relates directly or indirectly to the safety of personnel or

protection of property.

Содержание VEZ Series





































































































































Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды

Bosch VEZ Series, Руководство пользователя

Результаты поиска

Содержание VEZ Series

Отзывы:

Похожие инструкции для VEZ Series

Бренды по названию

Популярные бренды