Bosch Rexroth Inline Series Скачать руководство пользователя страница 18

Страница: 18 / 64

Safety Instructions for Electric Drives and Controls

12/58

Bosch Rexroth AG

| Electric Drives

R-IB IL INC-PAC

Application Description

and Controls

2.2.8

Protection Against Pressurized Systems

According to the information given in the Project Planning Manuals, motors cooled

with liquid and compressed air, as well as drive controllers, can be partially sup-

plied with externally fed, pressurized media, such as compressed air, hydraulics

oil, cooling liquids and cooling lubricating agents. Improper handling of the con-

nected supply systems, supply lines or connections can cause injuries or material

damage.

Environmental protection and disposal! The agents used to operate

the product might not be economically friendly. Dispose of ecologically

harmful agents separately from other waste. Observe the local regula-

tions in the country of assembly.

Risk of injury by improper handling of pressurized lines!

•

Do not attempt to disconnect, open or cut pressurized lines (risk of explo-

sion).

•

Observe the respective manufacturer's operating instructions.

•

Before dismounting lines, relieve pressure and empty medium.

•

Use suitable protective equipment (for example safety goggles, safety

shoes, safety gloves).

•

Immediately clean up any spilled liquids from the floor.

CAUTION

Содержание Rexroth Inline Series

































































Результаты поиска

Содержание Rexroth Inline Series

Отзывы:

Похожие инструкции для Rexroth Inline Series

Бренды по названию

Популярные бренды

Bosch Rexroth Inline Series, Настройка и установка

Результаты поиска

Содержание Rexroth Inline Series

Отзывы:

Похожие инструкции для Rexroth Inline Series

Бренды по названию

Популярные бренды