Bosch Rexroth Inline Series Скачать руководство пользователя страница 8

Страница: 8 / 64

Important Directions for Use

2/58

Bosch Rexroth AG

| Electric Drives

R-IB IL INC-PAC

Application Description

and Controls

1.1.2

Areas of Use and Application

The Inline system of Rexroth is a modular and flexibly scalable input/output system

in the degree of protection IP 20. It can be operated locally at the IndraControl L or

peripherally via a field bus coupler.

The Rexroth Inline system may only be used with the accessories and

parts specified in this document. If a component has not been

specifically named, then it may not be either mounted or connected.

The same applies to cables and lines.

Operation is only permitted in the specified configurations and

combinations of components using the software and firmware as

specified in the relevant function descriptions.

Typical applications of the Rexroth Inline system are:

•

Handling and assembly systems,

•

Packaging and foodstuff machines,

•

Printing and paper processing machines and

•

Machine tools.

The Rexroth Inline system may only be operated under the assembly, installation

and ambient conditions as described here (temperature, system of protection,

humidity, EMC requirements, etc.) and in the position specified.

In residential areas as well as in business and commercial areas Class A devices

may be used with the following note:

This is a Class A device. In a residential area, this device may cause

radio interferences. In such a case, the user may be required to

introduce suitable countermeasures at his own cost.

1.2

Inappropriate Use

Using the Rexroth Inline system outside of the above-referenced areas of

application or under operating conditions other than described in the document

and the technical data specified is defined as "inappropriate use".

The Rexroth Inline system may not be used if

•

they are subject to operating conditions that do not meet the above specified

ambient conditions. This includes, for example, operation under water, in the

case of extreme temperature fluctuations or extremely high maximum

temperatures or if

•

Bosch Rexroth has not specifically released them for that intended purpose.

Please note the specifications outlined in the general Safety Guidelines!

Содержание Rexroth Inline Series

































































Результаты поиска

Содержание Rexroth Inline Series

Отзывы:

Бренды по названию

Популярные бренды

Bosch Rexroth Inline Series, Настройка и установка

Результаты поиска

Содержание Rexroth Inline Series

Отзывы:

Бренды по названию

Популярные бренды