Bosch Rexroth Inline Series Скачать руководство пользователя страница 45

Страница: 45 / 64

Configuration, Installation, and Startup of an Inline System (Example)

Application Description

Inline

Electric Drives |

Bosch Rexroth AG

39/58

and Controls

Configuration, Installation, and Startup of an Inline

System (Example)

This chapter uses an example project to illustrate the configuration and installation

of an Inline station. It is designed to help you to carry out the following steps on your

own project.

The following sequence should generally be observed during configuration,

installation, and startup:

•

Define and describe the task. Specify the number of signals, the transmission

medium, the distance to be covered, etc.

•

Select the required I/O terminals. Select suitable power and segment terminals

according to your requirements for electrically isolated areas and the current

consumption of the individual terminals.

•

Select suitable power supplies.

•

Mount and install all terminals according to the instructions in the DOK-

CONTRL-ILSYSINS***-AW..-EN-P application description.

•

Switch on the supply voltage of the control or computer system.

•

Switch on the supply voltages of the Inline station.

The initialization of the bus system now begins.

8.1

Task

Example project

You want to acquire signals from twelve digital 4-wire sensors each with 50 mA

current consumption at 24 V in one system.

You want a short-circuit-proof initiator supply and diagnostics via the bus

Your application contains:

You also want to measure a slowly changing temperature in the range from

0°C to 120°C in two places in your application with 1% accuracy.

Only complete items (...-PAC) may be used.

When selecting the terminals, please observe the system limits of

Inline and INTERBUS in general.

Four lamps, each with 0.5 A nominal current using 3-wire connection method.

Four power contactors, each with 2 A nominal current, and a DC motor with 1.2 A

current consumption, all connected to a 24 V supply voltage. A high degree of

simultaneity can be assumed for the channels.

Содержание Rexroth Inline Series

































































Результаты поиска

Содержание Rexroth Inline Series

Отзывы:

Бренды по названию

Популярные бренды

Bosch Rexroth Inline Series, Настройка и установка

Результаты поиска

Содержание Rexroth Inline Series

Отзывы:

Бренды по названию

Популярные бренды