Bosch Rexroth Inline Series, Настройка и установка

Страница: 41 / 64

Diagnostic and Status Indicators
Application Description | Inline Electric Drives | Bosch Rexroth AG 35/58
and Controls
7.2 Indicators on Terminals with Remote Bus Branch
Fig. 7-2 Indicators on the R-IBS IL 24 RB-T-PAC terminal
Diagnostics The following states can be read on terminals with remote bus branch:
5 5 2 0
˛ ! !
5
!
2
!
2
!
2
˝ &
˝
D
L D
D
˝ ˛ ˆ
2
"
4
!
D (1) Green LED Diagnostics (INTERBUS status: RUN)
ON: INTERBUS active
Flashing:
0.5 Hz
(slow)
Communications power is present, INTERBUS not active
2 Hz
(medium)
Communications power is present, INTERBUS is active
I/O error is present
(e.g., fuse has blown, voltage is missing)
4 Hz
(fast)
Communications voltage is present,
error at the interface between previous and flashing terminal
(the terminals after the flashing terminal cannot be addressed)
(e.g., loose contact at the bus interface, terminal before the
flashing terminal has failed, another terminal was snapped on
during operation [not permitted])
OFF: Communications power is not present
RC (2) Green LED Remote bus connection (remote bus check)
ON: Incoming remote bus connection established
OFF: Incoming remote bus connection faulty
RD (3) Yellow LED Remote bus branch disabled
ON: Branching remote bus interface disabled
OFF: Branching remote bus interface not disabled.
LD (4) Red or
yellow LED
Local bus disabled
ON yellow: Local bus disabled
ON red: Isolated disconnection of local bus after error
OFF: Local bus not disabled
Additionally on terminals with fiber optic remote bus branch
FO3 Yellow LED Status of the branching fiber optic path
ON: Branching fiber optic path not OK or
system reserve reached in controlled operation
OFF: Branching fiber optic path OK or not used