Bosch Rexroth IndraMotion MTX 09VRS, Руководство пользователя

Страница: 79 / 248

A new M-key level with the functions for selecting the restart mode and the
restart strategy appears on the left side.
In the status line the text "Recording complete! Start returning!" is displayed.
Selection of the restart mode and restart strategy using M-keys:
●
Restart mode – Sequential block <L1>
● Restart mode – Individual block <L2>
● Tangential returning <L3>)
● Direct returning<L4>
● Starting via return program (path) <L5>
● Return point – block start <L6>
● Return point – point of interruption <L7>
● Return point – end of block <L8>
Before actually returning to the contour, "NC start" is used to process the return
movement program up to the setting point (4).
Before actually returning to the contour, "NC start" is used to process every
block of the return movement program up to the setting point (4).
The key <L3> "Tangential returning" opens a dialog where the function is acti‐
vated and the radius entered in inch or mm depending on G70/71.
Fig.6-5: Tangential returning dialog
If Direct returning was selected, the movement is made from point C to point B
directly without returning program.
Depending on the strategy, "NC start" is used to approach the point of return
and to continue processing (5). The display switches to the automatic screen
with the associated M-keys.
● Returning to the contour in more than one channel at the same
time is not possible.
● Returning to contour is impossible during tapping (G63).
● After an interruption, the spindle should be manually stopped
and restarted.
● Return to contour during a CPL wait status is possible only
after the wait status has been terminated.
Application Description | Rexroth IndraMotion MTX 09VRS Electric Drives
and Controls
| Bosch Rexroth AG 67/233
Operating Modes
Define Strategy
Returning to the Setting Point in the
Mode Next Block
Returning to the Setting Point in the
Mode Single Block
Tangential Returning
Direct Returning to the Setting
Point
Continue Processing