Bosch Rexroth IndraMotion MTX 09VRS, Руководство пользователя

Страница: 145 / 248

This post import function can be set in file "ToolManagementConfig.xml".
The following figure shows an example of a post import function in which the
"Tool active" bit is reset for all imported tool data sets.
Fig.8-27: Sample postimport setting
F-key <F8> can be used to switch between the 1st and the 2nd level of the F-
key bar.
Key switches to the 2nd level and switches back to the 1st level.
Pressing button switches to the superordinate level of the tool list display.
This key level can be defined by the user, permitting switching between various
list displays.
The number of decimal positions displayed is specified by the list/editor con‐
figuration.
"Additive value entry" can be used to enter correction values that are to be
added to the existing value (see chapter 8.2.1 "Value Entry" on page 116 ).
When displaying several lists, changing between these lists can be executed
via the configurable F-key function"TL_ActivateNextList".
A screen, additional defined to the default tool management application by the
user, can be exited using the configurable F-key function "Close active
screen". This is not possible for the default tool management application. After
the tool management was invoked, this screen remains active until the operat‐
ing principle is exited. (An exception is the exiting of the application via
Window ▶ Window ▶ Close window).
The edited list can be printed. All data, comments and headlines contained in
the list are printed. The table areas always displayed will always be printed on
each page.
In the default configuration, the function can also be retrieved using menu func‐
tion Edit ▶ Print tool list.
Procedure:
Application Description | Rexroth IndraMotion MTX 09VRS Electric Drives
and Controls
| Bosch Rexroth AG 133/233
Tool Management
Changing the Level
Back to Main Level
Number of Decimal Positions
Additive Value Entry
Activate next list
Exit view
Print