Bosch FLYER Mountain, Перевод оригинального руководства пользователя

Страница: 171 / 264

169
EN
If the E-Bike was confi gured with eMTB
mode ex works, the SPORT assistance
level is replaced by eMTB. In eMTB
mode, the assistance factor and the tor-
que are adjusted dynamically depending
on the pedal force applied to the pedals.
eMTB mode is only available with Per-
formance Line CX drives.
The full range of assistance levels includes:
• OFF
: motor assistance is switched off; the E-Bike
is operated like a normal bicycle through pedalling
alone. The pushing aid cannot be activated in this
assistance level.
• ECO
: effective assistance with optimum effi ciency
for maximum range.
• TOUR : consistent levels of assistance for tours
with large ranges.
SPORT/eMTB
:
• SPORT : powerful assistance for active riding on
hilly terrain and in city traffi c.
• eMTB : optimum assistance on any terrain, fast
acceleration, improved dynamics, maximum per-
formance
• TURBO : maximum assistance up to high pedal-
ling frequencies for active riding
To increase the support level, briefl y press the
«+» 6 button on the on-board computer until the
desired support level appears on the display i.
Press the
«–» 5
button to decrease the sup-
port level.
Switch bicycle lighting on/off
For models where the headlight is powered by the
e-bike system, you can switch on the front and
rear lights simultaneously by pressing the «+»
button for a couple of seconds . Hold down
«+»
button to switch off the bicycle lights.
When the lights are switched on, the lighting sym-
bol h is displayed.
Switching the bicycle lighting on and off does not
affect the display backlight.
Indicators and settings on the on-board com-
puter:
speed and distance indicators
The speedometer display a always shows the
current speed.
In the standard confi guration, the display i always
shows the last setting. If you repeatedly press the
«–» button for a couple of seconds , the travel
distance «TRIP» , total kilometres «RESET» and
battery range
«RANGE»
are displayed in succes-
sion. (Briefl y pressing pressing the «–» button
decreases the support level!)
To reset the travel distance «TRIP» , press and
hold the «+» and «–» buttons simultaneously.
First, «RESET» appears on the display. Continue
to hold down both buttons to reset the travel dis-
tance «TRIP» to “0” .
To change the displayed values from kilometres
to miles, hold down und kurz die Ein-Aus-Taste
1 drücken the on/off button 1.
The version information for the subsystems can
be checked for maintenance purposes. With the
system switched off, press the «–» and «+» but-
tons simultaneously, then press the on/off button
1 .
The USB socket is reserved for connection to di-
agnostic systems. It has no other function.
The USB connection must always be
fully closed with the protective cover
8.
Action Buttons Duration
Switch on-board computer
on Any
Switch on-board computer
on Any
Increase support +
Decrease support
–
Display «TRIP», «RESET»,
«RANGE», Support modes –
Switch bicycle lighting on +
Switch bicycle lighting off +
Reset travel distance
– +
Activate pushing aid
Deactivate pushing aid WALK
+
1.
2. Any
Switch from kilometres
to miles – 1. Hold down
2.
Version information 1) 2) + 1. Hold down
2.
1) The e-bike system must be switched off.
2) The information is displayed as ticker text
Checking the battery before its fi rst use
Check the battery before you charge it or use it
with your e-bike for the fi rst time. Press the A2
on/off button to switch on the battery. The battery
may be damaged when no LED on the charge
status indicator A1 lights up. Fully charge the bat-
tery before its fi rst use when one but not all LEDs
of the charge status indicator A1 light up.