Assembly Instructions
A s s e m b l y S t e p 4
Hardware Required
Attach the
Left Pedal (#37L)
onto the
Left Pedal Tube (#36L)
by inserting two
Hex Bolts (#38)
through the aligned holes*
and securing with two
Knob Nuts (#39)
. Repeat this process
on the other side using
Right Pedal (#37R)
.
Next, attach the
Left Pedal Tube Shroud (Front) (#46L/#46R)
to the front of the
Left Pedal Tube (#36L)
. Please make sure
the two parts are aligned and flush (you may hear the parts
gently “snapping” in place), then secure using three
Screws
(#34).
On the left side, insert the
Left Handle Bar (#13L)
onto the
Left Couple
r
Bar (#25L)
. Align the holes and insert two
Carriage Bolts (#14)
and securing with two
Arc Washers
(#16)
and two
Nylon Nuts (#17)
. Repeat this process on the
other side using
Right Handle Bar (#13R)
.
Next, attach the
Left Couple
r
Bar Shroud (#26F/#26R)
over the assembled
Left Handle Bar (#13L)
. Repeat this
process on the other side using the
Right Couple
r
Bar Shroud
(#27F/#27R)
.
BRM8981
(Note: Please ensure the sets of selected holes match on both
sides for your safety and proper fit.)
There are 3 sets of hole options to tailor
the pedal settings to your preference.
Please ensure the same sets of holes
are selected on both sides.
Hardware Required
Page 9
Bolts
#14. Carriage Bolt (M8x43x20xH3 mm)
[4 Pieces]
#16. Arc Washer (d8xφ20x2xR16 mm)
[4 Pieces]
Washers
Nuts
#17. Nylon Nut (M8xH7.5xS13 mm) [4 Pieces]
Bolts
#34. Screw (ST4.2x16Xφ8 mm)
[6 Pieces]
#38. Hex Bolt (M8x45x20xS14 mm)
[4 Pieces]
Others
#39. Knob Bolt (M8xφ60x30 mm)
[4 Pieces]
A s s e m b l y S t e p 5
