Hardware Required
Bolts
#29. Bolt (M8x16xS6 mm)
[6 Pieces]
Washers
#30. Washer (d8xφ16x1.5 mm)
[4 Pieces]
#31. Arc Washer (d8xφ20x2xR30 mm)
[2 Pieces]
With the help of an assistant, slide the
Main Frame Shroud 2
(#57)
onto the
Center Post (#28)
.
Next, connect
Monitor Wire (Lower) (#59)
to
Monitor Wire
(Middle) (#50)
. Then, slip on the
Center Post (#28) (with Main
Frame Shroud 2 (#57)
now also attached) over the front protruding
post of the
Main Frame (#60)
.
To attach the
Center Post (#28)
, lift up the
Main Frame Shroud 2
(#57)
. Secure the back of the post using two
Bolts (#29)
and
two
Washers (#30)
; and then secure the front of post using two
Bolts (#29)
and two
Arc Washers (#31)
. Secure the left and right
sides using two
Bolts (#29)
and two
Washers (#30)
.
You may now gently release the
Main Frame Shroud 2 (#57)
(which should cover the Bolts and Washers).
B
A.
Page 7
BRM8981
Make sure this wire is hanging out before
assembling the
Center post (#28).
A
A s s e m b l y S t e p 2
B.
55
40
1
2 3
4
55
40
1
2
3
4
Assembly Instructions
