User Manual for BCL-X Series Laser Machine
56
3
.
Contrary to transom's movement, and strike the side
Main board parameter is wrong.
Stop the machine and modify
main board parameter. Re-down
load configuration
4.Drivers or Motors' problem
Change drivers or motors
Equipment
stops
engraving,
skips
engraving or
engraves
wrongly
1.Check equipment's grounding situation, and check
grounding line is standard or not(resistance to ground
should not be bigger than 5Ώ)
Modify grounding line to reach
standard requirement.
2.Check if the original pattern has mistake, such as
graphs are crossed, not closed, or lack something
Correct mistakes in patterns
3.If other patterns don't have this problem, only some
one has such problem
Patterns and date mismanage.
You need to make working
sketch again
4.If problem still remains
Maybe it's computer's serial port
issue. It’s engraver's main
board's problem
Appendix 1
《
After-sale warranty of Laser Engraving Cutting Machine
》
First of all, thank you very much for purchasing Bodor products. In order to guarantee
the smooth processing of after-sales service, we will make the following announcements:
General principles
1. We are responsible for the maintenance of facilities which are within the Warranty
conditions.
2. Users must keep the machine's integrity and independence during operation. In the
following situation, our company will not take any direct, indirect or joint liability.
Furthermore, if any equipment is damaged or there are any losses in either economic or
