User Manual for BCL-X Series Laser Machine
19
Installation of Air Pump
Insert the silicone tube into the air-inlet by an air tube. Then connect the power and make the smooth
air-out of the air entry in the leaser head as shown in the below picture.
Air pump (air compressor) is very important in the system. High-pressure air sprays from
the light outlet of laser head through air tube. On one hand, it can keep the focus lens
clear enough. On the other hand, it can prevent working material from burning. Please
make sure the rubber tube is intact during machine working. Otherwise it may cause
burning of the materials.
Screw tightly
with spanner
