BMW 320d xDrive, Руководство пользователя

Страница: 77 / 145

Practical interior equipment
76
Setting compass zones
Depending on the vehicle's geographic loca-
tion, the relevant compass zone must be set.
See the global map with compass zones below.
To set the compass zone, press the adjustment
button on the bottom of the inside mirror with a
pointed object, e.g. a pen or similar, for approx.
3-4 seconds. The number of the compass zone
set is shown in the display.
To change the zone setting, press the adjust-
ment button repeatedly until the display shows
the number of the compass zone in which you
are currently driving.
The compass is operational again after approx.
10 seconds.
For the automatic-dim function, see Inside and
outside mirrors, automatic-dim, page
87 .
Calibrating the digital compass
The digital compass must be calibrated in the
following situations:
> C or CAL is displayed.
> An incorrect cardinal direction is shown.
> The cardinal direction shown does not
change although the direction of travel
does.
> Not all cardinal directions are displayed.
Procedure
1. Make sure that no large metal objects or
overhead power lines are near your vehicle
and that you have enough space to drive in a
circle.
2. Set the correct compass zone for your cur-
rent location.
3. Press the adjustment button to call up C or
CAL. Then drive in a full circle at a speed of
no more than 7 km/h (4 mph).
If calibration is successful, the C or CAL dis-
plays are replaced by cardinal directions.
Online Edition for Part-No. 01 41 0 159 204 - © 03/05 BMW AG