BMW 320d xDrive, Руководство пользователя

Страница: 41 / 145

Driving
40
the transmission will not shift down if the result-
ing engine speed would be too high. The gear
selected appears briefly in the instrument clus-
ter, followed by the gear actually in use.
To return to the automatic mode, move the
selector lever to the right into position D.
Overriding selector-lever lock
You can manually override the selector lever
lock in case a defect occurs in which the selec-
tor lever remains in position P although the but-
ton on the selector lever is pressed:
1. Unclip the gaiter of the selector lever.
2. Pull the gaiter up over the selector lever
until the gaiter is inside out.
3. Using the screwdriver from the toolkit, see
page
106 , hold down the red lever and
move the selector lever to the desired posi-
tion in the usual way.
Flashing turn indicators/
headlight flasher
1 High-beam headlights
2 Headlight flasher
3 Flashing turn indicators
Indicating a turn
Push the lever past the pressure point.
To cancel the flashing turn indicators, press the
lever as far as the pressure point.
An unusually rapid blinking of the indica-
tor light signifies that a turn signal lamp –
including any on the trailer being towed, if appli-
cable – has failed.
Make sure that the parking lights are not on
after you switch off the ignition.
<
Indicating a turn briefly
Press the lever as far as the pressure point. The
turn indicators flash three times.
Wiper system
1 Switching on wipers
2 Switching off wipers, or flick-wipe
3 Activating/deactivating intermittent wipe or
rain sensor
*
4
Cleaning windscreen and headlights
*
5
Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
Switching on wipers
The lever returns to the home position when
released.
Normal wiper speed
Press once.
The wipers switch to intermittent wipe as the
car comes to a halt.
Online Edition for Part-No. 01 41 0 159 204 - © 03/05 BMW AG