Blink Wall Mount Charging System, Руководство по установке

Страница: 18 / 29

14
IM0001_L2_R_WMv1.3
NOTE: If there are irregularities in the wall surface, it may be necessary to place a shim (not
supplied) behind one or more of the mounting holes to avoid distorting the cleat.
7.
Place the cord reel in position on the cleat. Using a socket wrench with extension, install three M6
hex-head bolts (Item 3, Figure 4) to attach the reel to the cleat. Tighten the bolts to 35–38 in-lb
(4.0–4.3 Nm).
8. Align tabs on the cover with the seven slots in the cord reel and firmly push in on the cover to
attach it to the cord reel. The tabs will snap into place to secure the cover.
Figure 7 – Cord Reel Cover Installation
Note: The cover may be removed by inserting a small screwdriver blade into the slot from the inner
side of the reel rim to release each tab.