Blink Wall Mount Charging System, Руководство по установке

Страница: 16 / 29

12
IM0001_L2_R_WMv1.3
Figure 5 – Charger Assembly Installation
6. Using the housing assembly as a template, mark the centers of the four mounting holes and
remove the housing assembly from the wall.
7. Using a 3/16-inch drill bit, drill a pilot hole for each of the mounting holes (wood-framed wall).
For brick or concrete walls, metal anchors must be placed in the wall. Follow the manufacturer’s
installation instructions for wall anchors that provide a minimum pull-out force of 80 lbs (36 kg)
per anchor; install four anchors.
8. Place the charger housing assembly back in position on the wall and install four ¼-inch lag
screws with washers (Items 5 and 6, Figure 4) to secure the housing assembly in place. Tighten
the screws enough to remove any gaps between the wall, housing base plate, washer, and screw
head.
NOTE: If there are irregularities in the wall surface, it may be necessary to place a shim (not
supplied) behind one or more of the mounting holes to avoid distorting the charger housing
base plate.