Blink Wall Mount Charging System, Руководство по установке

Страница: 8 / 29

4
IM0001_L2_R_WMv1.3
Guidelines and specifications
This Installation Manual describes how to properly install blink Model WE-30C/K and WE-48C/K
Electric Vehicle Supply Equipment (EVSE), referred to as the “ blink ” throughout this document.
Applicable codes and standards
The installer or contractor is responsible for obtaining and becoming familiar with the following
publications. Installer or contractor work and material shall comply with the local municipality’s
currently adopted versions of:

National Electric Code

Municipal, county, and state building codes and standards

Occupational Safety and Health Administration (OSHA)

Uniform Building Code

Other relevant codes and standards that apply to the installation of structural components and
electrical equipment
Installer/contractor notes
The installer or contractor selected to install the blink Model WE-30C/K and WE-48C/K charging
systems, including electrical connections, shall conform to the following general notes:

Installation shall be performed as described in the electrical plans and approved drawings.

All work shall comply with the local municipality’s currently adopted version of the National
Electric Code and Building Code.

Labor and materials not specifically described, which are incidental to installations and
without which a satisfactory job cannot reasonably be completed, are a part of this
installation work.

All materials used in the installation shall be new and UL-listed and labeled where required.

The installation of AC power circuits and circuit disconnects is not included in this work. Such
work must be performed by a certified electrical contractor.

It shall be the installer’s or contractor’s responsibility to carefully read this entire installation
manual and associated drawings and sketches to determine his/her responsibilities. Failure to
do so shall not release the installer or contractor from doing the work in complete accordance
with this document.

During performance of the work and after all requirements of this installation manual and
associated details are fully completed, ECOtality NA and/or the customer shall have the
option to inspect the work.