Blink Wall Mount Charging System, Руководство по установке

Страница: 6 / 29

2
IM0001_L2_R_WMv1.3
WARNING: RISK OF ELECTRIC SHOCK
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided with the product – if it
will not fit the outlet, have a proper outlet installed by a qualified electrician.
g. MODEL WE-30C/48C GROUNDING INSTRUCTIONS: (Permanently connected
model) This product must be connected to a grounded, metal, permanent wiring system; or
an equipment-grounding conductor must be run with the circuit conductors and connected
to the equipment grounding terminal or lead on the product.
WARNING: RISK OF ELECTRIC SHOCK

Do not touch live electrical parts.

Properly install and ground this equipment according to this installation manual, as well as
national, state and local codes.

Incorrect connections may cause electric shock.

Disconnect input power before installing or servicing the equipment.
WARNING: Models WE-30K/48K – Indoor use only
Cord-connected models of this equipment are intended for indoor use only.
WARNING: This equipment is intended only for charging vehicles that do not require
ventilation during charging. Please refer to your vehicle’s owner’s manual to determine its
ventilation requirements.
WARNING: RISK OF FIRE
To reduce the risk of fire, follow these installation guidelines:

Install blink on a wall constructed of material resistant to combustion.

A typical example of material resistant to combustion is plasterboard (drywall) over wood
framing. Other examples of materials resistant to combustion include brick, concrete, or
metal.
CAUTION: Incorrect connection may cause damage to the blink charging system.

For permanently-connected installations, use wire size and temperature rating as required
by local code. Ground
blink properly using equipment ground lug. Refer to the label in
charger housing identifying service wiring terminal connections.

For cord-connected installations, use cord set supplied with the unit only. Use only NEMA
6-50R receptacle for cord connection.