Blink Wall Mount Charging System, Руководство по установке

Страница: 12 / 29

8
IM0001_L2_R_WMv1.3
Installation
WARNING: RISK OF FIRE
To reduce the risk of fire, install blink on a wall constructed of a material resistant to
combustion such as plasterboard (drywall) over studs, 16 inches on center.
The
blink kit supports installation of the charger assembly over a wood-framed wall (studs on 16-inch
centers), with or without plasterboard (drywall) covering. If the assembly is to be installed on a brick
or concrete wall, anchors (not supplied) of an appropriate size suitable for the ¼-inch lag screws and
wall material must be used.
WARNING: Suitable wall anchors (not supplied) for brick or concrete walls must withstand a
pull-out force of 80 lb (36 kg) per anchor, without damaging the wall mounting.
Shipping box contents
1. Cord reel
2. Cord reel cover
3. Cord reel cleat
4. Charger housing assembly (with 18-foot
charging cord)
5. Hardware packet
Figure 2 — Shipping Box Contents