Blink Wall Mount Charging System, Руководство по установке

Страница: 2 / 29

ii
IM0001_L2_R_WMv1.3

2010-2011 by Electric Transportation Engineering Corporation. All rights reserved.
No part of the contents of this document may be reproduced or transmitted in any form or by any means
without the express written permission of Electric Transportation Engineering Corporation, dba ECOtality North
America™. The contents of this document have been verified by the manufacturer to be consistent with the
described components; however, inconsistencies sometimes occur. Such inconsistencies should be brought to
the attention of an ECOtality North America representative. Changes to this manual may be made at any time
without notice.
Disclaimer of Consequential Damages
ECOtality North America is not responsible for the use or application by any person of the materials in this
manual. ECOtality NA is not responsible for damages, either direct or consequential, arising out of or relating
to the use or application of these materials.
Blink™, Blink Network™ the Blink™ logo, and ECOtality North America™ are all trademarks of ECOtality, Inc.
ANSI
®
is a registered trademark of the American National Standards Institute.
Fluke
®
is a registered trademark of Fluke Corporation.
IEC
®
is a registered trademark of the International Electrotechnical Commission.
IEEE™ is a trademark of the Institute of Electrical and Electronics Engineers, Inc.
SAE J1772™ is a trademark of SAE International
®
.
TORX
®
is the registered trademark of Textron Inc.
Rev # Changes Made
1.1 Initial public release; first version with UL amendments
1.2
Verso layout; addition of RJ-45 documentation; various minor corrections
1.3
Final changes inserted for release
The current version of this manual is available online at www.blinknetwork.com/help
Electric Transportation Engineering Corporation
dba ECOtality North America
430 S. 2
nd
Avenue
Phoenix, Arizona 85003-2418