Bionet Cardio7, Руководство по эксплуатации

Страница: 31 / 171

V 1.31
2021. 05 31 / 171 Doc. # : BN-OP-C7
6) System Installation
Precautions For Installation
While installing Cardio7e/Cardio7, please pay attention to the following items:
- Use the equipment between the ambient temperature 10 to 40
℃
(50 to 104
℉
) and
humidity 30 - 85
％
.
- Check the power cord is properly connected, and the probe carefully handled.
- Do not plug multiple cords in a power outlet.
- Install and operate Cardio7e/Cardio7 unit on a flat surface.
- If you experience noise, ground the device.
- Do not use a power cord that may make a connection noise.
- Device settings will be recorded in the internal memory even when it is off.
- Prevent any shock or excessive force that may cause damage to the device.
- Place the device away from any dust or flammable materials.
Power Connection
The equipment needs electrical power to operate. Plug in one end of the power cable to
wall socket and the other to Cardio7e/Cardio7.
Patient Cable Connection
- Connect the patient cable to the patient cable connection port on the right side of the
body.
- Connect limb electrodes to RL (N), LL (F), RA(R), and LA (L) leads of the patient cable and
chest electrodes to V1 (C1), V2 (C2), V3 (C3), V4 (C4), V5 (C5), and V6 (C6), respectively.
Paper Installation
- Push the printer cover release switch to the right to open the printer door of the
Cardio7e/Cardio7. Install EKG paper with the side to be recorded appearing on top.
Close the cover to finish the paper installation process.
WARNING
Use only those products provided by us for ECG records. Otherwise, the output is in poor
condition and may affect the diagnosis during a pseudo-verification. We are not
responsible for any problems caused by ignoring them.