Bionet Cardio7, Руководство по эксплуатации

Страница: 59 / 171

V 1.31
2021. 05 59 / 171 Doc. # : BN-OP-C7
8) Record Mode Printing
For the record mode display, save the electrocardiogram in the memory first, and apply
the filter which is set up by the user to the saved electrocardiogram, and then extract the
parameters for the heart rate, PR interval, QRS duration, QT/QTc, and P-R-T axes. Then, print
out the heart rate according to the sensitivity, printing speed, and channel form that are
set up by the user.
10 seconds ECG recording
When one of 3ch+1rhy, 6ch+1rhy, 12ch, 3ch+3rhy and beat is selected for the channel
form, press the 'RECORD' key to display the saving time as below and save the 10-second
data.
After saving the 10-second data and the parameters for diagnosis will be
extracted, it will show the message as shown below and printing will begin.
Enter 'ESC' key on the operation panel in order to stop while obtaining or printing out
data. In this case, display the following message on the screen; cancel ECG recording if
saving, otherwise end output while printing out.